Connectivity Kit

The elitedali Multidrop Connectivity Kit connects DALI networks directly to any suitable Niagara platform.
Each licensed kit, comprising software and interface module, enables the connection of a single DALI channel, circuit or network of up to 64 DALI devices.
Summary overview of Niagara Smart IoT Convergent Lighting Controls
Detailed Introduction to Niagara Smart IoT Convergent Lighting Controls
Download elitedali Multidrop Connectivity Kit/N4 Datasheet
Download elitedali Multidrop Connectivity Kit/AX Datasheet
Sensors

This DALI MultiSensor combines presence/absence detection with daylight measurement for DALI Open Standards intelligent lighting networks.
Four physical configurations allow maximum installation flexibility. Licensed option for elitedali for Niagara solution, version v2.0.6 and later.
Download Datasheet

The low cost MultiSensor2 combines presence/absence detection with daylight measurement for DALI Open Standards intelligent lighting networks.
Available as a licensed option for elitedali for Niagara solution, version v2.0.6 and later.
Download Datasheet

Fulham’s elitedali MSensor 4 – High Bay DALI MultiSensor manufactured in the UK, is available as a licensed option for elitedali Multidrop for Niagara solution, version v2.0.6 and later.
The DALI® MSensor4 with its built-in intelligence gives a DALI smart lighting system the important ability to detect movement in a room and to measure the lighting levels.
Download Datasheet

Fulham’s elitedali MSensor 5 – Ultra Compact combines presence detection with daylight measurement for DALI Open Standards intelligent lighting networks in a very compact package. This unit is manufactured by Tridonic AG and especially configured to work seamlessly with Fulham’s elitedali Multidrop Solutions for Niagara.
Download the Datasheet

The elitedali MSensor 6 is a down to -30C operating temperature range, IP65 rated high bay PIR presence and light level device designed to be part of a DALI network connected to Niagara Framework platforms and provides exceptionally sensitive and long range detection. The detectors are ideal for high bay lighting control in areas with demanding spaces and increased mounting heights such as chilled warehouses, distribution centers, logistic facilities and factories.
Download the Datasheet

The elitedali MSensor 7 is a miniature PIR (passive infrared) presence detector and photocell for lux level measurement, is designed to be part of a DALI network connected to Niagara Framework platforms. It is ideal for integration into equivalent IP rated luminaires, and external lighting applications such as car parks and integration into street lights.
Download the Datasheet

The elitedali MSensor 8 is a DALI network batten mount PIR presence detector and photocell for lux level measurement, designed to be part of a DALI network connected to Niagara Framework platforms. It has been specifically designed for mounting onto a batten style luminaire allowing retrofit upgrades to existing lighting systems. The units are IP65 rated and are therefore suitable for outdoor use as well as wet and wash-down areas.
Download the Datasheet

The elitedali MSensor 9 network luminaire mount high bay PIR presence detector provides exceptionally sensitive and long range detection and photocell for lux level measurement, designed to be part of a DALI network connected to Niagara Framework platforms. The detector is ideal for high bay lighting control in areas with demanding spaces and increased mounting heights such as warehouses and factories, offering a simple retrofit to commercial luminaires and basic battens.
Download the Datasheet

The elitedali MSensor 10 is a combined passive infrared (PIR) motion sensor and photocell for lux level measurement, designed to be part of a DALI network connected to Niagara Framework platforms. A superior detection pattern using a high performance faceted lens suitable for use in open plan spaces or where a larger detection range is required.
Download the Datasheet

The elitedali MSensor 11 is a miniature PIR (passive infrared) presence detector and photocell for lux level measurement, designed to be part of a DALI network connected to Niagara Framework platforms. Useful for in luminaire/light fixture mounting and for use in spaces of up to 7m (23ft) high.
Download the Datasheet

elitedali MSensor/FRW miniature PIR head flush ring – white, for elitedali MSensor 7 & 11
Download the Datasheet

Fulham’s elitedali MSensorIP65/DBB is an IP65 rated enclosure designed to be used as a surface mounted option for detectors.
Features include an IP65 gland enclosure and flame retardant polycarbonate material. The enclosure is supplied with a pre-drilled 64mm hole adapted to accept both elitedali MSensor 2 and elitedali MSensor 4 DALI sensors.
Download the Datasheet
Power Supplies

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
This power supply offers an alternative packaged solution for in line installations. It is fully compatible with the DALI Open standards specification and is designed to provide 230mA of power on a single DALI network.
Download Datasheet

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
This power supply offers a compact DIN packaged solution. It is fully compatible with the DALI Open standards specification and is designed to provide 230mA of power on a single DALI network.
Download Datasheet

CNS continues to work with all open standards DALI product manufacturers to ensure the widest range of DALI products is available to our Certified elitedali Partners (CeP™) that are guaranteed for use with elitedali for Niagara solutions.
Download Datasheet

This Power Supply Unit offers compact in-line mounting, single DALI network power supply and LED output voltage indicator.
Fully compatible with the DALI Open standards specification, this product is part of an extensive range of DALI products for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

This compact Power Supply Unit supplies a maximum of 250 mA at 16.0 DC to a single DALI network.
Manufactured by Tridonic AG, it is part of a range of DALI products suitable for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet
Control Devices

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
These compact DALI Phase Dimmers are for use with non-intelligent 230V AC dimmable light fixtures including 230V AC LED – Retrofit bulbs in a DALI lighting control solution.
This offers additional cost and operational flexibility in smart elitedali lighting control solutions. Whether for initial low cost upgrades of non-intelligent lighting fixtures or where a mixed solution of DALI intelligent and non-intelligent light fixtures is required.
These dimmers offer choices of load from 3W to 300W for Resistive, Inductive and Capacitive load options.
Download Datasheet

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
These compact DALI relays are for use with non-dimmable ballasts in a DALI lighting control solution. In addition they may be used for control of suitable non lighting loads.
Download Datasheet

This 4 Channel Relay Module provides on/off control and DALI network connectivity to conserve energy and manage non intelligent lighting loads.
Manufactured by Tridonic AG, this addressable field relay is available for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

This 3-Channel DALI Relay Module is used to control relay switched loads such as non-intelligent lighting and other non-lighting loads.
Any number of these elitedali 3-Channel Relay Modules can be used in an elitedali for Niagara solution DALI network, v2.0.6 and later.
Download Datasheet
Network Devices

This USB DALI network interface allows low level monitoring of DALI traffic on an elitedali network for troubleshooting purposes.
Download Datasheet Please Login or Register to view this content -

This DALI Network Repeater Unit enables a single DALI network of up to 64 devices to be extended from 300m (984ft) to 600m (1,968ft) in length.
This compact, DIN rail mounted unit is part of a range of DALI products for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet
Useful Links: Standard Terms & Conditions - End User Software License Agreement