Category Archives: Products

All Product Categories

elitedali MSensor IP65 enclosure datasheet

CNS’s elitedali MSensorIP65/DBB is an IP65 rated enclosure designed to be used as a surface mounted option for detectors.
Features include an IP65 gland enclosure and flame retardant polycarbonate material. The enclosure is supplied with a pre-drilled 64mm hole adapted to accept both elitedali.MSensor2 and elitedali.MSensor4 DALI sensors.
Download the Datasheet

elitedali Remote DALI Power Supply

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
This power supply offers an alternative packaged solution for in line installations. It is fully compatible with the DALI Open standards specification and is designed to provide 230mA of power on a single DALI network.
Download Datasheet

elitedali Compact DIN DALI Power Supply

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
This power supply offers a compact DIN packaged solution. It is fully compatible with the DALI Open standards specification and is designed to provide 230mA of power on a single DALI network.
Download Datasheet

elitedali Phase Dimmers

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
These compact DALI Phase Dimmers are for use with non-intelligent 230V AC dimmable light fixtures including 230V AC LED – Retrofit bulbs in a DALI lighting control solution.
This offers additional cost and operational flexibility in smart elitedali lighting control solutions. Whether for initial low cost upgrades of non-intelligent lighting fixtures or where a mixed solution of DALI intelligent and non-intelligent light fixtures is required.
These dimmers offer choices of load from 3W to 300W for Resistive, Inductive and Capacitive load options.
Download Datasheet

elitedali Compact DALI Relay

CNS continues to work with all DALI® product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that are suitable for use with elitedali for Niagara.
These compact DALI relays are for use with non-dimmable ballasts in a DALI lighting control solution. In addition they may be used for control of suitable non lighting loads.
Download Datasheet

elitedali Ultra Compact MSensor Datasheet

CNS’s elitedali Ultra Compact MultiSensor combines presence detection with daylight measurement for DALI Open Standards intelligent lighting networks in a very compact package. This unit is manufactured by Tridonic AG and especially configured to work seamlessly with CNS’s elitedali Multidrop Solutions for Niagara.
Download the Datasheet

elitedali Mini USB DALI Network Monitoring Tool

This USB DALI network interface allows low level monitoring of DALI traffic on an elitedali network for troubleshooting purposes.
Download Datasheet Please Login or Register to view this content -

elitedali.MSensor4, High Bay DALI MultiSensor

CNS’s elitedali MSensor4 High Bay DALI MultiSensor manufactured in the UK, is available as a licensed option for elitedali Multidrop for Niagara solution, version v2.0.6 and later.
The DALI® MSensor4 with its built-in intelligence gives a DALI smart lighting system the important ability to detect movement in a room and to measure the lighting levels.
Download Datasheet

DALI Single Network Power Supply

CNS continues to work with all open standards DALI product manufacturers to ensure the widest range of DALI products is available to our Certified elitedali Partners (CeP™) that are guaranteed for use with elitedali for Niagara solutions.
Download Datasheet

cns-enocean Universal Switch Insert (EMEA region)

These maintenance-free, energy harvesting wireless switches revolutionise building engineering, enabling flexibility impossible with fixed wiring.
EnOcean radio switches, produce their energy from every press of the switch; they need no batteries and are maintenance-free.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit
Download the latest datasheet

cns-enocean Universal Switch Insert (North America region)

These maintenance-free wireless switches revolutionise building engineering, enabling levels of flexibility impossible with fixed wiring.
EnOcean radio switches, produce energy from every press of the switch; they need no batteries and are maintenance-free.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit
Download the latest datasheet

SAB05

Thermokon EnOcean Wireless Valve Actuator

Enabling bidirectional communication, this wireless valve actuator combines actuator drive, controller and transducer.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit, no Message Server product is required.
Download Datasheet

Spartan ME8300 series cns-enocean wireless actuators

These wireless actuators are commissioned from, and communicate with, other networked devices via Niagara using the cns-enocean Connectivity Kit.
There is no requirement for mapping IO, labelling IO or enumeration checking saving significant commissioning time and risk.
Download Announcement

cns-enocean Energy Harvesting CO2, Temperature and Humidity Sensor

A world first, this easy to install CO2 sensor is powered via ambient indoor light making it totally maintenance free with no batteries required.
Supports the open EnOcean standard (ISO/IEC 14543-3-10) for seamless connection with Niagara BMS using using the cns-enocean Connectivity Kit.
Download Datasheet Please Login or Register to view this content -

Enocean Ceiling Occupancy Sensor

cns-enocean Ceiling Mounted Occupancy Sensor

This stylish, wireless occupancy sensor – powered by ambient indoor light – offers easy energy saving for rooms, hallways and other common areas.
The sensor communicates with EnOcean-enabled devices (e.g. temperature/lighting controls) when a space has been unoccupied for a set period of time.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

cns-enocean Wall Mounted Occupancy Sensor

This stylish, wireless occupancy sensor – powered by ambient indoor light – offers easy energy saving for rooms, hallways and other common areas.
The sensor communicates with EnOcean-enabled devices (e.g. temperature/lighting controls) when a space has been unoccupied for a set period of time.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

cns-enocean Solar Ceiling Multi Sensors

This versatile, energy harvesting and wireless ceiling sensor detects movement as well as ambient brightness (plus optional temperature sensor).
Functions include 360° occupancy detection and integrated light sensor 0-510 Lux. Integrated solar energy storage ensures maintenance-free operation.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

cns-enocean Ceiling Multi Sensors

This versatile wireless ceiling sensor detects movement as well as ambient brightness (plus optional temperature sensor).
Functions include 360° occupancy detection and integrated light sensor 0-510 Lux.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

cns-enocean Window Handle

This stylish wireless window handle transmits its position to enable monitoring of the status of the window in question.
Available in a choice of finishes and with/without lock, the SRG01 generates its own energy when the handle is turned so there is no need for wires or batteries.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

cns-enocean Room Sensors/Operating Panels Temperature

This batteryless and wireless sensor enables temperature/ventilation control in conjunction with SRC-x interfaces and higher-graded control systems.
A choice of temperature sensors is available including models with adjustable temperature (rotary or slide switch), presence key and/or fan speed switch.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

Intelligent LonFibre Transceiver

Fibre optic interconnection is ideal for applications needing high throughput, expandability, immunity to electromagnetic interference or communications over long distances.

Maximum LonWorks® communication throughput is maintained on the fibre optic interconnect regardless of the distance or number of nodes attached. A fibre optic ring can implement multiple subnets with several hundred fibre optic nodes (the allowable number of nodes is a function of average link length and the fibre optic cable characteristics; 750 to 3,000 node capacity is typical). These capabilities make the next generation SMX transceiver ideal solutions for large projects with substantial message traffic as well as small projects to connect as few as two nodes together.

Download Datasheet

Download Installation Guide

Download Typical Optical Power Margins Datasheet

LonWorks Serial Gateway

The Serial Gateway provides a serial interface between RS-232 or RS-485 and LONWORKS networks offering data transfer rates of up to 115.2 kbps. The Neuron chip maps the interface to the LON side.

Download Datasheet

Lon TerminatorIII

As part of CNS’s Lon Network Infrastructure Product Family (LNIPs) this product compliments our Compact LonRouter, LonRepeater family as well as our eNode™IV Lon/IP852 Routing products and LonFibre products. Termination is required on all cable networks in order to cancel out ghosts and reflections, which occur when signals are transmitted onto the cable. Without termination, the signal can be degraded beyond the ability of receivers to pick up and decode the signal. The degradation of signals is affected by the topology of the cable system i.e. how it is wired together.

Download Datasheet

LonWorks Physical Layer Repeater

LonWorks Physical Layer Repeater Two & Three Channel – This is the latest generation of two and three channels devices which are used when you need to exceed the recommended maximum length of a wire. The repeater receives packets in one side and echoes them out of the other. This allows users to double the length of the wire as well as increasing the number of transceivers that can be placed onto the channel. By daisy chaining repeaters networks can be further extended.

The repeater does not give an increase in bandwidth as all packets are repeated on both sides, nor does it allow routing or filtering to be done. For this, you will need a router – for further information see CNS LonWorks® Intelligent DIN Router datasheet.

Download Datasheet

Intelligent Lon Fibre Router

Please be aware that Echelon has now ceased manufacture of a key sole sourced component, the RTR-10 Core Module, used in these products. Supply of these LonFibre Routers will continue only for as long as existing inventory of this core component remains and on a first come first served basis. This product is not recommended for use in new projects, however, the LonIP/WiFi 852 Routers above are not affected and may be a potential replacement solution for new and existing Lon over Fibre network projects.

The router implements the full set of LonWorks® EIA/ANSI 709 router functions: Configured, Learning, Bridge or Repeater. It connects LonWorks twisted pair copper networks to LonWorks Fibre optic networks, or extends twisted pair networks over long distances or through harsh environments. The Fibre router can be used to create links and back-bones that connect copper LonWorks subsystems. This Fibre router implements the open standard LonTalk® EIA- 709 communications protocol. They are simple to install out of the box being fully compatible with all LNS based network management tools.

This product is not recommended for new system designs. Last time buy final order date is 29th June 2012 – Download DatasheetDownload Installation GuideDownload Typical Optical Power Margins Datasheet

LonWorks Intelligent Din Router

VERY IMPORTANT WARNING – Echelon Product Alerts – Problem: RTR-10 Router buffer capacity changes can cause router configuration failures! See more…

Please be aware that Echelon has now ceased manufacture of a key sole sourced component, the RTR-10 Core Module, used in these products. Supply of these LonRouters will continue only for as long as existing inventory of this core component remains and on a first come first served basis. This product is not recommended for use in new projects, however, the LonIP/WiFi 852 Routers above are not affected and may be a potential replacement solution for new and existing Lon projects.

Latest generation of LonWorks® Intelligent routers offering compact DIN mounted design, 230VAC & 24VAC supply and on-board selectable network termination.

Download Datasheet

eNode IV™ Lon/IP/WiFi 852 Router

These products are now only available by special order and for existing customers. They should not be considered for new system designs. There are no alternative products being considered to replace the eNodeIV.
The eNode™IV/GR4 Lon/IP 852 Router is based upon Adept System’s class leading GadgetTek™ technology for Lon over IP routing products. The eNodeIV Lon/IP 852 Router brings an innovative and very compact modular design for optimal scalability, minimum space and granular cost effectiveness. The eNodeIV Lon/IP 852 Router further widens our leadership in price performance for EIA 852/709.1 routers by significantly reducing the cost per channel.

The eNodeIV is a “made to order” product with minimum volume requirements of 5 units per order. Please contact sales@control-network-solutions.co.uk for details.

Download DatasheetDownload User ManualCNS Niagara Setup for eNodeIV Lon IP852

eNodeIV Bridge Routing eNodeIV Redundant Twin ModeeNodeIV AC Plug Adapter ModuleeNodeIV DC PSU Wiring InstructionseNodeIV Router UpdateeNodeIV Firmware Update

How ‘Flooding’ your Niagara® deployment using eNode™IV in ‘Flood Mode’ might save money

CNS-Enocean Connectivity Kit

cns-enocean Connectivity Kit

This kit enables Niagara platforms to connect directly with, commission and operate EnOcean® wireless energy harvesting devices via Ethernet interfaces.
Any manufacturer’s wireless switches and sensors (conforming to EnOcean Electronic Profiles) can be be used, with no need for 3rd Party commissioning tools.
Introduction to Smart IoT Energy Harvesting Wireless Controls
Download cns-enocean Connectivity Kit/N4 Datasheet
Download cns-enocean Connectivity Kit/AX Datasheet

EnOcean Wireless Magnet Contact pic

cns-enocean Wireless Magnet Contact

This batteryless/wireless magnetic contact harvests energy from sunlight, enabling wire-free monitoring of the status of windows and doors.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download datasheet

Helvar-4-Channel-Relay-Unit

elitedali.HDALI4XR, DALI 4 Channel Relay Module

This 4 Channel Relay Module provides on/off control and DALI network connectivity to conserve energy and manage non intelligent lighting loads.
Manufactured by Helvar Oy, this addressable field relay is available for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

C-DALI-PSU

elitedali.C, DALI Power Supply Unit

This Power Supply Unit offers compact in-line mounting, single DALI network power supply and LED output voltage indicator.
Fully compatible with the DALI Open standards specification, this product is part of an extensive range of DALI products for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

cns-enocean Key Card Switches

These wireless, self-powered transmitters are designed to accept room or security card keys as used in hotel rooms, boarding rooms and offices.
Key card switches ensure that lights are turned off when the occupant leaves. Energy harvesting is made via a maintenance-free energy generator.
This product is directly commissioned from Niagara using the cns-enocean Connectivity Kit.
Download Datasheet

Tridonic-4-Channel-Relay

elitedali 4-RM-S DALI 4 Channel Relay Datasheet

This 4 Channel Relay Module provides on/off control and DALI network connectivity to conserve energy and manage non intelligent lighting loads.
Manufactured by Tridonic AG, this addressable field relay is available for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

Helvar-498-8-x-DALI-Relay-Module

elitedali.HDALI8XR, DALI® 8 Channel Relay Module

This 8 Channel Relay Module provides on/off control and DALI network connectivity to conserve energy and manage non intelligent lighting loads.
Manufactured by Helvar Oy, this addressable field relay is available for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

elitedali Connectivity Kit

The elitedali Multidrop Connectivity Kit connects DALI networks directly to any suitable Niagara platform.
Each licensed kit, comprising software and interface module, enables the connection of a single DALI channel, circuit or network of up to 64 DALI devices.
Summary overview of Niagara Smart IoT Convergent Lighting Controls
Detailed Introduction to Niagara Smart IoT Convergent Lighting Controls
Download elitedali Multidrop Connectivity Kit/N4 Datasheet
Download elitedali Multidrop Connectivity Kit/AX Datasheet

HP-DALI-Relay

elitedali.HPRS, DALI® Hi-Power Field Relay

This Hi-Power Relay (for North America) provides on/off control and DALI network connectivity to conserve energy and manage non intelligent lighting.
Manufactured by Coopers/Fifth Light Technology Inc., this addressable field relay is available for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

FifthLight-MSensor

elitedali.MSensor3, DALI MultiSensor

The built-in intelligence of the DALI MSensor3 gives a DALI smart lighting system the ability to detect presence/absence and measure lighting levels.
This North American approved unit is available as a licensed option for elitedali for Niagara solution, version v2.0.6 and later.
Download Datasheet

MSensor 2

elitedali.MSensor2, DALI MultiSensor

The low cost MultiSensor2 combines presence/absence detection with daylight measurement for DALI Open Standards intelligent lighting networks.
Available as a licensed option for elitedali for Niagara solution, version v2.0.6 and later.
Download Datasheet

elitedali.DALIREP, DALI® Network Repeater Unit

This DALI Network Repeater Unit enables a single DALI network of up to 64 devices to be extended from 300m (984ft) to 600m (1,968ft) in length.
This compact, DIN rail mounted unit is part of a range of DALI products for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

DALI-TridonicAtco-PSU

elitedali.PS2, DALI Power Supply Unit

This compact Power Supply Unit supplies a maximum of 250 mA at 16.0 DC to a single DALI network.
Manufactured by Tridonic AG, it is part of a range of DALI products suitable for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

elitedali.H, DALI Power Supply Unit

This compact DALI Power Supply Unit supplies a maximum of 250 mA at 20 VDC to a single DALI network.
It is part of a range of DALI products suitable for use with elitedali for Niagara, v2.0.6 and later.
Download Datasheet

3-Channel Relay Module

elitedali.3-RM-C, 3 Channel DALI Relay Module

This 3-Channel DALI Relay Module is used to control relay switched loads such as non-intelligent lighting and other non-lighting loads.
Any number of these elitedali 3-Channel Relay Modules can be used in an elitedali for Niagara solution DALI network, v2.0.6 and later.
Download Datasheet

MSensor

elitedali.MSensor, DALI MultiSensor

This DALI MultiSensor combines presence/absence detection with daylight measurement for DALI Open Standards intelligent lighting networks.
Four physical configurations allow maximum installation flexibility. Licensed option for elitedali for Niagara solution, version v2.0.6 and later.
Download Datasheet